There are different types of trailers on the road every day. However, all of these trailers sometimes go for a long time without being on the road, which is why you should be very safe with them.
Trailer Safety Checklist
Before you take your trailer on the road after being in the parking for a long time, you need to conduct a checklist. According to experts at Hale Trailer, some of the things you should do include:
- Ensure that the trailer looks straight and square
- Determine that the tie have no worn-out treads, bulges, cuts, and no steel belts are showing
- Tighten all the hinges, pins, and latches
- Inflate all the tires to the pressure pounds on the tire
- Ensure that the ball is sized properly for the tire and that it is tight
- Look if the brakes are working perfectly and adjust them for the load you are carrying
- Ensure that the trailer sits level once you hinge it
- Plugin your electrical system and check the brake lights, running lights, and turn signals
- Hook the trailer’s safety chains
- Inspect the bolts for any wear and tear and the hitch for cracks
- Anchor all cargo firmly
- Bring your current inspection, insurance card, and registration for the trailer and the vehicle
- Bring an emergency kit including fire extinguisher, chocks for tires, tool kit, flares, and towing chain
Trailer Safety Tips
As explained by the experts at Hale trailer, some parts of the trailer could wear out over time or rust if you keep your trailer off work for a long time. Some of the safety tips to ensure it works properly on the road include:
Grease the bearings
Bearing grease breaks down over time and eventually becomes incapable of dissipating heat and lubricate. According to Hales Trailer experts, you should repack your wheel bearings in grease every 10,000 miles or after a year.
Under-maintained bearings overheat and can eventually start a fire, seize or fall off and cause the wheels to fall off from the trailer as you drive.
Pin the coupler
The second most common cause of trailers breaking down is the coupler coming off from its ball mount. Ensure that you hook the trailer to the right size ball. You may also lose your trailer to a loose locking, which you can prevent by using a pin.
That prevents the locking lever from wriggling into the unlocked position as the trailer bounces on the road.
Ensure the trailer s level when you load
The ball mount’s drop determines how low or high the trailer’s tongue will ride. You can estimate the drop by:
- Measuring to the receiver’s top from level ground
- Measure from the ground to the coupler’s bottom
- Subtract the two measurements
Inspect the coupler
The pressure applied as the coupler presses down and twists on the ball wears it down, and it thins over time. If you notice your coupler has even the smallest crack, you should replace it immediately.
Only use trailer tires
The sidewalls on the trailer tires are stiff, which increases the weight they can handle, unlike other tires that have flex sidewalls for a comfortable ride.
If you notice that your trailer is no longer serving you well and need a replacement, hopper bottom trailers are the best choice for you. You can get them in different capacities and sizes that you can hook to any type of truck or tractor.