Does everyone think that can I use a pressure washer as a jetter? If you have the right tools you can use it as a jetter. Everyone calls it with different names clog, grease, scale, roots, and sludge. This machine supplies high-pressure water via the jetter nozzle.
If you live in Australia and looking for a better center, Melbourne Jetter Centre is best for you. They have good experience and the best machines for this work. They have done several services and all the clients are happy with their work. They will not give you a chance to complain about this work.
They can also repair your machine because they have the best engineers for these machines.
You must know the difference between both things. It has a functional hose and nozzle. The jetting hose is lightweight, abrasion-resistant, slippery, and pushable. It is when you are using a pipe inside. Jetting nozzle is designed to pull the hose into the line. It is used to provide proper cleaning
In this article, we will talk about this in detail. Both things are used for different work. If we talk about pressure washers, no doubt there is a huge difference between hardware store models. It is used for professional cleaning contractors.
Page Contents
Flow (gpm)
The pressure washer is between 2.5 and 4 gpm and the jetters start with the 4 gpm mark and go up from there, 8 to 9 gpm. If we talk about portable models, it can go up to 18 to 25 gpm for trailer-mounted equipment. If we talk about the rule of thumb for flow, it is 1 gpm per 1 inch of pipe diameter. It is for normal flushing and maintenance. Higher gpm is used for tougher jobs for example grease and tree roots. If you use larger pressure washers, it can be effective for jetting up to a 4-inch pipe. If you use the nozzle of the jetter, it will clean more effectively.
Features of jetters and pressure washers
Both machines come with a pump, engine, and some form of pressure control (usually an unloader valve). If you use a professional jetter, It has additional features just as has pressure gauge which helps aid in making adjustments. It also has a pulsation valve which is used to create a hose shake. It is also used for a hose reel with an adequate continuous length of jetting hose. It also has multiple jetting nozzles which help nozzle on and off. It is also being used for cooling the pump for longer periods in bypass.
Duty cycle
It is used for high pressure (2,700 to 3,000 psi) but lower hp (5 to 7) units. It is not made with heavy-duty parts like commercial equipment.
Nowadays, it is being used as and trending product. It is a smaller, cheaper-built pump.
Drive Type
These machines are divided into three basic drive types. Some of them are not bad units. If we talk about their means, they have two things.
For more detail, you may visit our site or you can call us.
Leave a Reply